Tundra 245 Litre - 250 Quarts

The Tundra 245 litre box is our largest cooler and is one of the premium expedition boxes, they feature 3″ thick insulation which gives this range the caperbility to hold ice for up to 7 days, locking points on both front corners and built in tie down points. As normal with the Tundra range they also have rubber feet and carrying chords.

Length 55″. Width 22″. Height 21 1/4″

1000 gram Advanced Quality Gel Pack

TUV approved. FDA Approved. US Food and Drugs Agency approval.

Superb value Gel Pack which is new to the UK market.

This Gel Pack is serious it keeps frozen in a Cool Ice Box Sherpa, Tundra or Frosty Cooler for up to 3 DAYS!

When you are calculating your requirements we recomened just 1 x Gel Pack per 20 litre of box capacity

Length 10 1/2″. Width 8″ and just 1″ thick

Big and strong enough to carry .........
eight longboards
or two Kayaks
or four windsurfers
or six SUP's
or a rowing boat
or a combination of the above or whatever you like!

Designed for surf school transport, will carry loads of swellies!

Choose between 30cm PU wheels or 49cm PU wheels, they both roll really well over sand, shingle and pebbles, but the bigger ones roll even more easily over soft sand.

Dimensions -

700mm between uprights
1000mm between bearers
Maximum width 900mm
Handle length from axle 2.4 meters
Load capacity 120Kg
Max load length 6 meters !

Small Fishing Cart by Wheeleez(tm). Smaller but just as capable!

The Wheeleez(tm) Small Fish can still happily carry a massive 35Kg of equipment, but it is smaller in every way. With 22cm diameter fat balloon wheels running low pressure tyres it will still cruise over soft sand, shingle, mud and soft wet grass without ploughing in, skidding or becoming bogged down.
It folds down very small when not in use, and being made from stainless steel and powder coated steel it can withstand the rigors of the marine environment for many years.

Ideal for junior fishermen, see if you can catch 35 Kgs !

Due to re-stocking, we are selling off the end of line stock of small carts
that we have remaining. These have been at the back of our warehouse, and as
a result, on some of these carts there are some small rust spots, which are
easy to remove; However we selling these carts as "seconds" at a reduced
price of £74.99 to clear the stock quickly. There are limited quantities
remaining. We anticipate new stock of all our carts by the end of September
2010.

Spec :-

Dimensions:- Weight: 5.4Kg (12 lbs)
Payload capacity: 35Kg (77 lbs)
Material: Tubular steel
Platform dimensions: 25.4cm wide x 30.5cm deep(10" wide x 12" deep)
Width incl. wheels: 62cm (24.4")
Folded - frame & wheels: 55.9L x 34.3W x 20.3H cm (22"L x 13.5"W x 8"H)
Handle height: 96.5 cm (38")
Finish: Epoxy powder coated
Balloon Wheels: 22cm dia x 12.7cm wide (8-2/3" dia x 5" wide)
Axle dimensions: 12.7mm (.50”) X 62.0cm (24.4”)

The Wheeleez(tm) Beach Cart Mini is a more compact version of our regular Humpalumpa Folding Beach Cart. It is the perfect cart when space is tight, yet you still want to carry everything in one trip!

Though small, light and simple it is still the real deal, the soft Wheeleez(tm) balloon tyres glide over sand and wet grass without digging in. It can carry 35Kg of load which can be extremely welcome.

This one folds down very simply for storage, and is small and light to handle so children love it. Supplied with two long strong straps suitable for securing containers and coolboxes, plus anything else that you want to take!

Due to re-stocking, we are selling off the end of line stock of small carts
that we have remaining. These have been at the back of our warehouse, and as
a result, on some of these carts there are some small rust spots, which are
easy to remove; However we selling these carts as "seconds" at a reduced
price of £74.99 to clear the stock quickly. There are limited quantities
remaining. We anticipate new stock of all our carts by the end of September
2010.

Dimensions:-

Weight: 5.4Kg (12 lbs)
Payload capacity: 35Kg (77 lbs)
Material: Tubular steel
Platform dimensions: 25.4cm wide x 30.5cm deep(10" wide x 12" deep)
Width incl. wheels: 62cm (24.4")
Folded - frame & wheels: 55.9L x 34.3W x 20.3H cm (22"L x 13.5"W x 8"H)
Handle height: 96.5 cm (38")
Finish: Epoxy powder coated
Wheeleez(tm) Balloon Wheels: 22cm dia x 12.7cm wide (8-2/3" dia x 5" wide)
Axle dimensions: 12.7mm (.50”) X 62.0cm (24.4”)

Choose a beach cart and an icebox from the selection available to get the perfect picnic system!

When enjoying the outdoors, sporting events, fishing or just heading out for a picnic there is no better support system than a top quality icebox to keep your food and drink in tip top condition. And a robust rough terrain Humpalumpa cart to take it wherever you go with minimum effort.

Just choose the right combination for you and we will deliver to your doorstep courtesy of HUMPALUMPA

Sherpa 75 Litre

35 5/8" Long 18 1/2" Wide 16 7/8" High

Where a little bit more room is required the 75 litre delivers.

The Yeti Sherpa is our 2nd generation cooler. This coolers has a one-piece, roto-molded shell with 2" of polyurethane foam insulation and a unique built-in sealing gasket. This combination of insulation and superior sealing provides excellent ice retention. Outstanding thermal properties, durable construction and innovative hardware (non-slip rubber feet and integrated heavy-duty hinges) made this cooler the first of it's kind.

Sherpa 65 Litre

29 1/2"Long 18 1/2" Wide 16 7/8" High

A great size for the average family, enough room for everything!

The Yeti Sherpa is our 2nd generation cooler. This coolers has a one-piece, roto-molded shell with 2" of polyurethane foam insulation and a unique built-in sealing gasket. This combination of insulation and superior sealing provides excellent ice retention. Outstanding thermal properties, durable construction and innovative hardware (non-slip rubber feet and integrated heavy-duty hinges) made this cooler the first of it's kind.

Sherpa 45 Litre

27 1/2"Long 18 1/2" Wide 14" High

A Traditional small to medium family size, also the smallest of the long box designs for Fishermen, keep your catch in perfect condition.

The Yeti Sherpa is our 2nd generation cooler. This coolers has a one-piece, roto-molded shell with 2" of polyurethane foam insulation and a unique built-in sealing gasket. This combination of insulation and superior sealing provides excellent ice retention. Outstanding thermal properties, durable construction and innovative hardware (non-slip rubber feet and integrated heavy-duty hinges) made this cooler the first of it's kind.

Sherpa 25 litre

18 7/8" Long 13 1/2"Wide 14" High

The Classic small family sized box

The Yeti Sherpa is our 2nd generation cooler. This coolers has a one-piece, roto-molded shell with 2" of polyurethane foam insulation and a unique built-in sealing gasket. This combination of insulation and superior sealing provides excellent ice retention. Outstanding thermal properties, durable construction and innovative hardware (non-slip rubber feet and integrated heavy-duty hinges) made this cooler the first of it's kind.

The Lunch Mate - 15 Litres

16" Long 11 1/2" Wide 11 1/2" High

Perfect for a small trip to your local Iceland or for picnics, day trips or taking bait when fishing. Marine grade Stainless Steel handle.

The Yeti Sherpa is our 2nd generation cooler. This coolers has a one-piece, roto-molded shell with 2" of polyurethane foam insulation and a unique built-in sealing gasket. This combination of insulation and superior sealing provides excellent ice retention. Outstanding thermal properties, durable construction and innovative hardware (non-slip rubber feet and integrated heavy-duty hinges) made this cooler the first of it's kind.

Strong Blue Large Plastic Box

Stacking strong box which fits onto Humpaluma Carts, load it up, chuck it in the boot, then transfer it to the cart when you get to the beach. These are tough and strong

Dimensions 50cm by 65cm by 38cm deep

Large Strong Plastic Box.

Stacking strong box which fits onto Humpaluma Carts, load it up, chuck it in the boot, then transfer it to the cart when you get to the beach. These are tough and strong

Dimensions 50cm by 65cm by 38cm deep

Low Pressure Tyre Gauge

Wheeleez(tm) Wheels run at low pressure, it is easy to inflate them with any standard car tyre foot or hand pump, but checking the pressure is more difficult as most gauges are not accurate below 10psi. So here is a convenient and accurate gauge, pocket sized, it measures up to 20psi and has a hold/reset feature for checking pressures in difficult to see spaces.

Use a standard wheelchair on the beach and all terrain with this conversion kit.

Why limit your access to hard smooth surfaces? With this kit of parts it is possible to convert any standard wheelchair so that it can roll over soft sand, shingle, pebbles, rocky and muddy surfaces of all sorts, so that you can go across the beach and out into the countryside.

All terrain beach wheelchairs are large, heavy, expensive items but with this kit it is possible to convert any standard chair to take the fantastic Wheeleez(tm) balloon wheels.
The kit comprises -
Two 49cm PU wheels with stainless steel bearings for the rear.
Two 30cm PU wheels with stainless steel bearings for the front.
Two aluminium axles to suit.
Four wheel retaining clips
A range of fittings and spacers to suit your chair.
Please advise us of chair details when you order email info@Humpalumpa.com

With balloon wheels fitted it is difficult to propel yourself so a pusher will normally be required.
The front wheels are non steering so skid steering is required, again a pusher is usually required.
For most though not all chairs the standard brakes will no longer work, so steep slopes should be avoided.
Folding chairs will still fold, however the balloon wheels must first be removed, this is a quick and simple process.

Wheely Bin 30cm PVC wheel kit

With Wheeleez® balloon wheels fitted it is so easy to move a wheely bin over soft or rough ground even when full. These 30 cm PVC wheels are tough and strong, yet so soft that even the weight of a full bin will leave a wet lawn undamaged. Likewise transporting rubbish over sandy beaches and soft ground becomes quite easy when you have got soft Wheeleez® wheels fitted to your bin.

Our kit comes complete with a 1" aluminium axle which won't rust,
two PVC 30cm Wheeleez® balloon wheels
two fixing clips
and full fitting instructions
Payload 75 Kgs

please only modify privately owned wheelie bins.

Balloon Wheel Conversion Kit for a Wheely Bin.

Standard wheely bin wheels really dig into lawns, sand and soft ground especially when the bin is full.

Our solution is to fit big 30cm Wheeleez® balloon wheels which will easily roll over soft sand, they won't damage lawns even when the lawn is wet and when the bin is full ! So moving your rubbish, grass clippings and garden waste can become so much easier.
Soft ground is easily crossed, so are steps, cobbles and all rough and uneven surfaces.

The kit comprises two 30 cm PU balloon wheels, an aluminium axle, and two retaining clips.
It is a simple job to remove the old wheels and replace them.
Payload with PU wheels is a massive 90KG !

Please only modify your own bin not one that belongs to the local authority.

Zapcat Beach Trolley.

The Zapcat is a great boat to beach launch, being light weight and good in the surf, so we have come up with this trolley which makes the job really easy!

It simply fits under the rails at the back taking the full weight of the motor and the majority of the boat, enabling a single man to lift the front and roll the whole thing across the beach.

Our Zapcat beach trolley is very lightweight, it uses the 42cm Wheeleez(tm) balloon wheels and all aluminuim or stainless steel fittings. The wheels run on stainless steel bearings!

It only weighs 12Kg but it is 1.6 meters wide so shipping may be expensive!
Max payload 150Kg

Wheel Details are:-
With tire pressure 2.5 psi at sea level and at a temp range of 75-80°F (24-26.5°C) 16.5x7.9" (42x20 cm).
Width at Bushing/Bearing 7.8" (19.8 cm).
Tire Material Polyurethane.
Hub Color/Hub Material Gray/Polypropylene.
Max. Payload/Wheel 176 lbs (80 kg).
Pressure Range Low Pressure 2–4 psi (0.14-0.28 bar).
Ideal & Ship Pressure 2.5 psi (0.17 bar) .
Temperature Range 5 to 167 F (-15 to 75 C) .
Wheel Weight 5.5 lbs (2.5 kg).

Swivel Castor Unit for use with 30cm wheels, universal 4 bolt mounting.

A strong glass filled plastic castor unit with swivel action suitable for a range of cart and trolley applications.

Will suit 30cm diameter wheels with 1" bush or bearing.

Stainless steel axle.

Four bolt top fixing plate.

Use to create a lawn cart, beach cart, work cart or sports cart of your choice.

Pin Clips for fast and easy wheel removal !

These 6mm pin clips are simple fast and easy to fit and remove, yet when fitted the wheels are held firmly in place. Ideal for all 3/4" and 1" axle designs.

3/4" (19mm) Diameter Aluminium Axles in a range of different lengths to suit your DIY project.

These axles are made from high grade 6082 aluminium which has good strength properties as well as being suitable for machining and welding.

Outside diameter is a nominal 3/4" or 19mm, material thickness is 10swg.

Supplied pre drilled to accept the 6mm Pin Clips

These are offered in a popular range of lengths, but we are able to supply any custom length as required, please contact us at info@Humpalumpa.com or call 01598 750109

1" (25.4mm) Diameter Aluminium Axles in a range of different lengths to suit your DIY project.

These axles are made from high grade 6082 aluminium which has good strength properties as well as being suitable for machining and welding.

Outside diameter is a nominal 1" or 25.4mm, material thickness is 10swg.

Pre drilled to accept the 6mm Pin Clips

These are offered in a popular range of lengths, but we are able to supply any custom length as required, please contact us at info@Humpalumpa.com or call 01598 750109

Available in a range of different lengths to suit your project.

Each axle is made from stainless steel with an outside diameter of 1/2" or 12.7mm. In each end there is a groove to suit the TLK quick release fasteners.
Note. Axle lengths are quoted complete end to end, to calculate distance between inside faces of wheels please subtract -
110mm per wheel for 22 cm wheels
167mm per wheel for 30 cm wheels

The Beach Cart by Wheeleez(tm) is the biggest and most capable hand cart that we offer, it has a million different uses and very few limitations.
On the beach or in the garden the huge Wheeleez(tm) 42cm diameter fat soft wheels cruise over all sorts of terrain, being soft and pliable they won't dig in at all, so even soft wet lawns can be rolled over without damage.
It has a kickstand to hold it level when loading and unloading, and the huge poly tub can easily cary just about anything with ease, it has a capacity of 100 Lts and will cary 100 Kgs !

Weight w/wheels:	29 lbs (13 kg)
Payload capacity:	220 lbs (100 kg)
Tub volume:	3.5 cbft (0.1 cbm)
Tub dimensions:	Width at rim: 22” (56 cm)
Width inside: (between wheel wells)	14.4” (36.5 cm)
Length inside bottom:	24” (61 cm)
Length at rim:	35.4” (90cm)
Tub depth:	12.5” (32 cm)
Cart width with wheels attached:	34.4” (87.5 cm)
Collapsed dimensions: (as packaged)	Length: 38” (96.5 cm) Width: 26” (66 cm) Height: 16” (40.6 cm)
Tub Material:	High Density Polyethylene
Aluminum Finish:	Marine grade anodized
Hardware:	Stainless steel
Balloon Wheels:	Diameter – 16.5” x 7.9” wide (42 x 20 cm)

22 cm diameter low pressure balloon PVC wheels with range of axle sizes.

At a pressure of just 2.5 psi these amazing Wheeleez(tm) wheels just glide over soft sand, wet grass and rough surfaces, they are 8.7 cm wide and they still have a payload of 35 Kg per wheel !

Available in two standard axle sizes of half inch (12.7mm) diameter and one inch (25.4mm) diameter to suit just about any design or retro fit application.

Available with Twist Lock Knob or TLK, this is a quick relase device to enable easy removal of wheels from the axle simply by twisting the hubcap! Requires a groove to be turned in the axle close to the end, only available for 1/2 inch axle sizes.

Part Numbers .

WZ1-22CA with 1/2" axle hole.
WZ1-22CA-TLK with 1/2" axle hole and TLK fixing.
WZ1-22CB with 3/4" axle hole.

Outside Dimensions*.

With tire pressure 2.5 psi at sea level and at a temp range of 75-80°F (24-26.5°C) 8.7x5" (22x12.7 cm).
Width at Bushing/Bearing 4.5" (11.5 cm).

PU Bushing Diameter. (PU Wheel Bushings/Bearings are interchangeable)

WZ1-22CA 1/2" bushing .
WZ1-22CA-TLK 1/2" bushing with Twist Lock Knob.
WZ1-22CB 3/4" bearing .

Tire Material :- Soft Pliable Plastic.
Hub Color/Hub Material Grey/Polypropylene.
Max. Payload/Wheel 77 lbs (35 kg).
Pressure Range Low Pressure 2–3 psi (0.14-0.20 bar).
Ideal & Ship Pressure 2.5 psi (0.17 bar) .
Temperature Range 23 to 104 F (-5 to 40 C) .
Wheel Weight 2.4 lbs (1.08 kg).

*Wheel dimensions may vary temporarily by up to +/- 1" (2.5cm) in diameter and/or width, depending on temperature and elevation.

Made for a GCSE project, this cleverly designed hand cart folds flat when not in use.

Designed to cary beach gear over the sand it uses the 22cm Wheeleez(tm) balloon wheels to good effect. With single pivot steering and a mostly wooden construction it was cheap to build and works superbly in a beach environment, then folds flat for storage.

NOT FOR SALE

The Wheeleez(tm) Platform Wheelchair Trailer introduces a “new era” in accessibility and mobility.

The Platform Wheelchair Trailer permits any wheelchair to cross sand, grass, mud, and difficult terrain. Users remain in the comfort of their own wheelchair. Using low pressure Wheeleez(tm) balloon wheels the Platform Trailer allows safe and secure wheelchair transport over almost anything. Includes lockable brake system.

As well as being pushed the trailer can be towed behind a quad or similar for beach rescue or assistance, ideal for lifeguards and councils.

Spec :-
Assembled Platform Dimensions: Length: 53.5” (136 cm) Width: 52.8” (134 cm)
Height: 45.3" (115 cm)
Platform Area: 32" (81.5cm) wide x 37" (91cm) long
Ramp Dimensions: Accomodates wheelchairs with 14" to 31" distance between wheels.
Folded Dimensions: Length: 37.25" (94.5cm) Width: 32" (81 cm) Weight: 46.2 lbs (21 kg)
Payload capacity: 400 lbs (181 kg)
Material: Powder coated aluminum frame
Wheeleez(tm) Balloon Wheels: two 19.3x9" (49x23 cm) and one 11.8x7" (30x18 cm)

The Wheeleez(tm) Six Wheel Boat or PWC trolley handles larger Jet Ski's , PWC's and boats.

It is quick and easy to assemble and dismantle with common hand tools, has three axles and 6 huge soft Wheeleez(tm) balloon wheels to spread the load over a massive area which will avoid digging in or getting stuck in soft sand. Supplied by Humpalumpa to meet the highest demands when beach launching!

It will hold most three seat PWC or Jet Ski's up to 550 Kg's in weight. It comes with Winch Kit for easy loading and unloading. There is an optional Hitch Kit which attaches to Winch Kit for easy towing behind your ATV.

Spec :-

Weight: 141 lbs (64 kg)
Dimensions: 67.5Lx45Wx19”H (172x114x49.5 cm)
Payload capacity: 1210 lbs (550 kg)
Material: Anodized aluminum frame. Marine grade stainless steel hardware.
Balloon Wheels: 19.3x9" (49x23 cm)

Four Wheel Jetski and Boat Trolley by Wheeleez(tm)

The Wheeleez(tm) 4 wheel jetski and boat trolley supplied by Humpalumpa will carry most Jet Skis or PWCs weighing up to 350 Kg's.

As it uses huge Wheeleez(tm) soft balloon wheels which will roll easily over the beach.
It can be assembed and dismantled easily and quickly with common hand tools.
This boat trolley has two axles and 4 balloon wheels and will carry most two seat PWC or Jet Ski's.
It is also suitable for transporting small boats, RIB's and dingy's
It comes with a Winch Kit for easy loading and unloading. Optional Hitch Kit attaches to Winch Kit for easy towing behind your ATV.

Made from marine grade aluminium, the 4 wheel trolley is both strong and light, yet durable and hardwearing, the wheels utilise stainless steel bearings.

Spec :-

Weight: 107 lbs (48.5 kg)
Dimensions: 49.5Lx45Wx19”H (125.5 cm L x 114 cm W x 49.5 cm H)
Payload capacity: 770 lbs (350 kg)
Material: Anodized aluminum frame. Marine grade stainless steel hardware.
Balloon Wheels: 19.3x9" (49x23 cm)
Width between bearers adjustable from 14" to 24"
Height of bearers above base at centre 7"

Two Wheel Trailer by Wheeleez(tm).

No boat ramp to launch from? No Problem! Try the Two Wheel Wheeleez(tm) Trailer supplied by Humpalumpa!

You will roll your small boat or dinghy from your trailer over the beach with ease.
The two wheel trailer is constructed from the highest quality materials and comes with a hand winch to make pulling your boat onto the trailer a breeze. Includes retaining straps for safe transport. Optional ATV Hitch Kit.
Also use for smaller Jet Skis.

Spec:-

Weight: 74 lbs (33.6 kg)
Dimensions: 25Lx45Wx19”H (63.5x114x49.5 cm)
Payload capacity: 507 lbs (230 kg)
Material: Anodized aluminum frame. Marine grade stainless steel hardware.
Balloon Wheels: 19.3x9" (49x23 cm)

Wheeleez(tm) Sea Kayak Cart, this is the big one!

Our Sea Kayak Cart by Wheeleez(tm) has detachable balloon wheels that will transport your canoe or kayak with ease over the most difficult surfaces, soft sand, shingle, pebbles, the lot. It has a heavy-duty aluminum frame with marine grade stainless steel hardware. Our Sea Kayak Cart has double kickstands for easy one person loading. Includes two 13’ tie-down straps.

Spec :-

Weight: 13 lbs (6 kg)
Payload capacity: 176 lbs (80 kg)
Folded dimensions: Frame: 34.25x13x4” (87x33x10cm)
Material: Anodized, heavy duty aluminum frame
Balloon Wheels: 11.8x7" (30x18 cm)

Wheeleez(tm) Kayak Canoe Cart:

The universal all round canoe cart by Wheeleez(tm).

With our Kayak Canoe Cart, one person can easily maneuver a canoe or kayak. The Kayak Canoe Cart comes equipped with black rubber, pneumatic tires and transports up to 176 lbs. The wheels come off the Kayak Canoe Cart and re-attach quickly with clip pins, while the aluminum frame folds scissors-style to fit in your boat. Includes two 13’ tie-down straps.

Spec :-

Weight: 10 lbs (4.5 kg)
Payload capacity: 176 lbs (80 kg)
Folded dimensions: Frame: 28x13x4” (71x33x10cm)
Material: Anodized, heavy duty, aluminum frame
Wheels: 10x3" (25 x 8 cm)

Wheeleez(tm) Kayak Cart Mini.

Designed specifically for touring kayaks. The Kayak Cart Mini is compact and collapsible to fit into most kayak deck hatches including smaller day hatches. Wheeleez(tm) balloon wheels provide easy, cushioned transport over most any terrain including sand, mud, small rocks/obstructions and environmentally sensitive areas.

Wheeleez(tm) balloon wheels are detachable.

Heavy Duty frame with 3mm wall thickness, marine grade anodized inside and out.

28cm (11") ground clearance.
Kickstand for easy loading

Includes:

1- Aluminum frame, marine grade anodized with stainless steel hardware
2- Wheeleez(tm) balloon wheels: 8.75 x 5 " (22 x 13cm)
2- Tie-down straps, 13.1' (4m)

Spec :-

Weight: 6.8 lbs (3 kg)
Payload capacity: 99 lbs (45 kg)
Folded Dimensions: Frame: 25.2 x 10 x 4” ( 64 x 25 x 10 cm)
Material: Anodized, heavy duty aluminum frame
Balloon Wheels: 8.7 x 5” (22cm dia x 12.7cm width)

The Small Photography Cart by Wheeleez(tm) is a more compact version of our regular Wheeleez(tm) Big Photography Cart. It is the perfect cart when space is tight, yet you still want to carry everything in one trip!

Though small, light and simple it is still the real deal, the Wheeleez(tm) soft balloon tyres glide over sand and wet grass without digging in. It can carry 35Kg of load which can be extremely welcome.
This one folds down very simply for storage, and is small and light to handle so children love it.

"Over fields and hills and rough terrain and the Photographers cart follows on making life easy on the back and shoulders."

Due to re-stocking, we are selling off the end of line stock of small carts
that we have remaining. These have been at the back of our warehouse, and as
a result, on some of these carts there are some small rust spots, which are
easy to remove; However we selling these carts as "seconds" at a reduced
price of £74.99 to clear the stock quickly. There are limited quantities
remaining. We anticipate new stock of all our carts by the end of September
2010.

Dimensions:-

Weight: 5.4Kg (12 lbs)
Payload capacity: 35Kg (77 lbs)
Material: Tubular steel
Platform dimensions: 25.4cm wide x 30.5cm deep(10" wide x 12" deep)
Width incl. wheels: 62cm (24.4")
Folded - frame & wheels: 55.9L x 34.3W x 20.3H cm (22"L x 13.5"W x 8"H)
Handle height: 96.5 cm (38")
Finish: Epoxy powder coated
Balloon Wheels: 22cm dia x 12.7cm wide (8-2/3" dia x 5" wide)
Axle dimensions: 12.7mm (.50”) X 62.0cm (24.4”)

30 cm diameter low pressure balloon PU wheels with range of axle sizes.

At a pressure of just 2.5 psi these amazing Wheeleez(tm) wheels just glide over soft sand, wet grass and rough surfaces, they are 18.5 cm wide and they still have a payload of 55 Kg per wheel !

Available in three standard axle sizes of half inch (12.7mm) diameter, three quarter inch (19mm) diameter and and one inch (25.4mm) diameter to suit just about any design or retro fit application.

Available with Twist Lock Knob or TLK, this is a quick relase device to enable easy removal of wheels from the axle simply by twisting the hubcap! Requires a groove to be turned in the axle close to the end, only available for 1/2 inch axle sizes.

Part Numbers .

WZ1-30UA with 1/2" axle hole.
WZ1-30UA-TLK with 1/2" axle hole and TLK fixing.
WZ1-30UB with 3/4" axle hole.
WZ1-30UC with 1" axle hole.

Outside Dimensions*.

With tire pressure 2.5 psi at sea level and at a temp range of 75-80°F (24-26.5°C) 11.8x7" (30x18 cm).
Width at Bushing/Bearing 7.3" (18.5 cm).

PU Bushing Diameter. (PU Wheel Bushings/Bearings are interchangeable)

WZ1-30UA 1/2" bushing .
WZ1-30UA-TLK 1/2" bushing with Twist Lock Knob.
WZ1-30UB 3/4" bearing .
WZ1-30UC 1"bearing.

Tire Material Polyurethane.
Hub Color/Hub Material Gray/Polypropylene.
Max. Payload/Wheel 121 lbs (55 kg).
Pressure Range Low Pressure 2–4 psi (0.14-0.28 bar).
Ideal & Ship Pressure 2.5 psi (0.17 bar) .
Temperature Range 5 to 167 F (-15 to 75 C) .
Wheel Weight 2.91 lbs (1.32 kg).

*Wheel dimensions may vary temporarily by up to +/- 1" (2.5cm) in diameter and/or width, depending on temperature and elevation.